Epson USN 52R Operating Manual page 94

Configuring the USN 52 R
LANGUAGE Setting the display language
In LANGUAGE you can select the dialog language for
interactive communication with the instrument. The
following languages are available:
• German
• English
• French
• Italian
• Spanish
• Portuguese
Operation:
– Highlight the left function group in the center function
table with I.
– Select the required language with M.
Krautkramer USN 52R/USN 52L
• Swedish
• Danish
• Norwegian
• Finnish
• Dutch
• Russian
MEAS. UNITS Setting the measurement
In this function you enter the measurement units in
which the instrument is to operate. You can select be-
tween METRIC or INCH.
Operation:
– Highlight the left function group in the center function
table with I.
– Select the required measurement unit with M.
H Note:
If the measurement units are changed at a later time,
the values are automatically converted. However, in
order to work with "rounded off" values, you should set
the measurement units at the beginning of the test.
Issue 05, 02/00
units
Operation
5-49