Sharp AR-FX11 Operation Manual page 37

8
Press the [OK] key.
The selected day is set.
OK
• To cancel a timer operation after the above procedure has been completed, follow the procedure in
Note
"CANCELLING A FAX TRANSMISSION" (page 26).
• A timer job number is automatically assigned to the operation. This number can be used to cancel a stored job.
(See the note "Contents of the stored job screen (screen of step 3)" on page 27.)
• Other operations can be performed after a timer operation is set up. If another operation is in progress when
the specified time arrives, the timer transmission will begin when the job in progress is completed.
ADVANCED TRANSMISSION METHODS
9
Perform the desired fax operation.
The steps that follow will depend on the type of
operation.
The following operations can be performed as a
timer operation:
• Normal transmission (page 18)
• Broadcast transmission (page 32)
• Polling (page 36)
• Serial polling (page 38)
• F-code polling (page 53)
• F-code confidential transmission (page 55)
• F-code relay request transmission (page 59)
3
35