To Display Lu Information - Hitachi XP P9500 User Manual

To display LU information

When displaying LU information, if the -item parameter, -c parameter, or
the -c -item parameter is specified at the same time as the -lu parameter,
you can add and display items and display a summary of LU information. This
section describes each parameter and the LU information and displayed
items.
To display LU information
-lu
When neither the -c nor -item parameter is specified with the -lu
parameter, the information about the LU recognized by HDLM is
displayed. The sorting key is iLU and its configuration information is
displayed for each LU.
By using the sub-parameter, -hdev or -pathid, you can filter the LU
information to be displayed. If you do not specify the -hdev or -pathid
parameter, the information about all LUs recognized by HDLM is
displayed.
For details on the content of each displayed item, see
Displayed LU Information on page
The following shows the sub-parameters:
-hdev host-device-name
-pathid AutoPATH_ID
-t
Example
6-50
Filters the information only for the LUs corresponding to the specified
host device.
Specify the name of the logical device file (minus the slice number, in
cUtXdY format) for the HDLM device to indicate the desired host
device.
The host-device-name string is case-sensitive.
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
Omits the title for each information item.
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu
Product : 9500V
SerialNumber : 0051
LUs : 3
iLU HDevName Device PathID Status
0001 c6t2d0 sd61
sd64
0002 c6t2d1 sd62
sd65
0003 c6t2d2 sd63
sd66
Command Reference
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
6-55.
000003 Online
000009 Online
000004 Online
000010 Online
000005 Online
000011 Online
Table 6-17