Error Information - Hitachi XP P9500 User Manual

Table 2-6 Types of Error Information on page 2-29

error information.

Table 2-6 Types of Error Information
Log name
Integrated trace file
Trace file
Error log
log for the
dlmcfgmgr utility
Syslog
#
Hitachi Dynamic Link Manager User Guide (for Solaris(R))
Description
Operation logs for the HDLM
command is collected.
Trace information on the HDLM
manager is collected at the level
specified by the user. If an error
occurs, you might need to change
the settings to collect trace
information.
Error information is collected for the
user-defined level. By default,
HDLM collects all error information.
Logs are collected when the
dlmcfgmgr utility is executed.
The HDLM messages on and above
the level set by the user with /etc/
syslog.conf are collected.
We recommend that you configure
the system so that information at
the Information level and higher is
output.
Syslogs can be checked using a text
editor.
HDLM Functions
describes the types of
Output destination
The default file path is /
var/opt/hitachi/
HNTRLib2/spool/
hntr2[1-16].log.
To specify the output
destination directory and
the file prefix for the
integrated trace file, use a
Hitachi Network Objectplaza
Trace Library (HNTRLib2)
utility.
The trace file name is /var/
opt/DynamicLinkManager/
log/hdlmtr[1-64].log
HDLM Manager logs:
/var/opt/
DynamicLinkManager/
log/dlmmgr[1-16].log
Hitachi Command Suite
Common Agent Component
logs:
/var/opt/
DynamicLinkManager/
log/dlmwebagent[1-
n].log
The value n depends on
the setting in the file
dlmwebagent.properti
es.
The log file name is /var/
opt/DynamicLinkManager/
log/dlmcfgmgr1[1-2].log
The default file path is /
var/adm/messages.
#
The syslog file path is
specified in the file /etc/
syslog.conf. For details,
refer to the Solaris
documentation.
2-29