Table of Contents
Advertisement
SETTING
THE CLOCK
Things to know before starting
• The clock uses the 12-hour system.
(Be aware of AM and PM.)
•
When you first plug in your VCR. the clock
will read "
:
"
• While
you are setting
the
clock,
the
"menu"
display on the "IV screen will
prompt you through the procedures.
• If you press a wrong digit, press the CLEAR
button repeatedly until the digit to be cor-
rected flashes and then enter the correct
digit.
POWER button--
GUIDE button
_=====m=
VCR t button
Number
buttons
0 through
9
1. Turn on the power of both VCR and TV.
2, Be sure that the TV is set to the video chan-
nel Ichannet 3 or 4). (See page 16.)
3. Aim the remote control unit at the receiver on
the front panel of the VCR.
4. Press the GUIDE button until the "MENU",
as illustrated, appears on the TV screen.
NOTE: If the menu does not appear when
the GUIDE button is pressed, press the VCR
1 button and then the GUIDE button.
Original
menu
5. Press "2" button to set the clock.
6. Set the hour by pressing two number buttons
on the remote control unit and two more for
the minute (for example, O 2 1 5 for 2:15),
E18
Advertisement
Table of Contents
