Table of Contents
Advertisement
10. Press four digits, two for the hour and two
more for the minute (for example, "0"
"7"
"3" "0" for 7:30L
11. Press four digits (two for the month and two
for the day) (for example, "0" "3" "2" "1" for
begin recording on March 21). If you want to
select
the
recording
speed,
press TAPE
SPEED button to select the desired speed.
12. Press the GUIDE button
to enter your pro-
gram and return to the programming "menu"
display. Additional programs may be entered
by repeating Steps 6 through 11.
If you have no other programs to enter, press
the GUIDE button twice.
13. Turn off VCR power.
Now recording will begin automatically at the
start time.
Note:
To stop a timer recording in progress
with the VCR, press POWER button and then
press STOP button within 10 seconds.
RECALLING THE PROGRAM
1. Follow Steps 1 through 5 of "Programming
the
timer for unattended recording" on pages 29
and 30.
2. Press "4" button (Program Review).
3. Press "4" again if you want to view the next
program information immediately.
4. When you finish reviewing the programs, press
the GUIDE button three times to switch off the
on-screen display.
E31
Advertisement
Table of Contents
