Controls And Features - Hitachi VT-F350A Instruction Manual

CONTROLS AND FEATURES
11 12 13 14 15 16 17 18 19 20 "_
t.
I ,:7 J==
1 234567 89
1. CASSE'I-rE COMPARTMENT
Insert a cassette in through a door, and load-
ing will he completed automatically.
Note: Power is turned on automatically
when the cassette is loaded.
2, POWER BUTTON
Turn system power on and off.
3, STOP/EJECT BuI-rON
If this button is pressed, while the set is
operating, the running of tape stops and all
operating modes are cancelled (except for
timer recording). The cassette isejected, when
this button is pressed again in STOP mode.
Note: Power may be on or off when remov-
ing the cassette.
4. REWIND BUTTON
Press to start rewind.
Press this button during playback, and
reverse playback picture at high speed can
be seen.
6. PLAY BU'I-I"ON
Press to start play.
6. FAST FORWARD BUI-I'ON
Press to activate fast forward.
Press this button during playback, and
forward playback picture at high speed can
be seen.
7. CHANNEL SELECT BUT'TONS
Select the channels you wish to view or to
record by pressing these buttons.
,
o
10.
11.
12.
13.
And you can also select "LINE"* by pressing
these buttons to record or watch the pro-
gram input at the VIDEO IN and AUOIO IN.
('One channel position either higher or lower
outside the range of your preset channels.)
HEAD CLEANING BUTTON
Press this button to manually clean the video
heads when the dirt cannot be removed by
auto cleaning.
RECORD/IRT BUTTON
Press to start recording.
INFRARED RAY RECEIVING SECTION
Receives the infrared ray from remote
control unit.
TAPE-IN INDICATOR
Lights when cassette is loaded in the com-
partment,
HI-FI INDICATOR
Lights when a Hi-Fi recorded tape is being
played.
VCR MODE INDICATOR
• _ appears during recording.
• <1<)appears during the rewind mode.
• I:>1>appears during the fast-forward
mode.
• I> appears during the playback.
• nil appears when the PAUSE button is
pressed during record or play mode and
disappears when the PAUSE button is
pressed again.
E6