Table of Contents
Advertisement
HOW TO OPERATE YOUR TV BY USING THE REMOTE
CONTROL
UNIT
This remote control unit is designed to operate 14 different types of TV's.
You must first program the remote control unit to match the remote system in your TV.
I Programming
the remote control for "IV set I
1. Install the batteries in the remote control unit,
2. Turn on your TV.
3. Point remote control unit toward front of your
TV.
4. While
holding TV
button
down,
press 0
through 9, CHANNEL (•),
( • ), 100lENT and
PREV CH button (one at a time). The TV will
change channels when the matching number
button is pressed.
5. Release both buttons when the TV starts
changing (_hannels. The other remote buttons
shown on next page wilt now control your TV.
Notes:
•
If your TV does not respond to any of the
above procedures, the TV cannot be con-
trolled by this remote control unit.
•
You will only have to program your remote
control to match your TV once.
It will remem-
ber what codes matchs your TV until you
replace the batteries.
• Whenever you install or replace batteries in the
remote control, you must program the remote
control to match the remote system in your
TV.
•
When operating the TV, first press the "IV but-
ton, and then press the button which cor-
responds to the TV function you want.
= When you want to operate the VCR with this
remote control after operating the TV, first
press the VCR 1 button end then press the
button which corresponds to the VCR func-
tion you want.
! 1
!
VCR 1 button-
---_
r-
IO0/ENT
=. _,._,'
button
._ _ .
-
--
TV button
--0
~ 9 buttons
--
PREV CH
button
--CHANNEL
IV
or &)
buttons
E33
Advertisement
Table of Contents
