Channel Tuning - Hitachi VT-F350A Instruction Manual

CHANNEL TUNING
The automatic programming feature makes it easy
and convenient to program the TV station into the
tuner's memory.
Automatic programming is usually a "one-time"
procedure, but you will need to repeat it if you
move to a location that has different channels, or
if the power is interrupted for about 30 minutes.
POWER button-
GUIDE button_
..... _cS©I
cJ _ Jl
-VCR 1 button
- Number buttona
"0" through "9"
PLAY button
STOP button
1. Turn on the power of both VCR and "IV.
2. Be sure that the TV is set to the video chan-
nel (channel 3 or 4). (See page 16.)
3. Aim the remote control unit at the receiver on
the front panel of the VCR.
4. Press the GUIDE button unSI the "MENU", as
illustrated, appears on the TV screen,
NOTE: If the menu does not appear when the
GUIDE button is pressed, press the VCR 1 but-
ton and then the GUIDE button.
5. Press button "1" for channel setting.
6. Press button "1" to select "NORMAL",
"CATVI" or "CATV2". If your VCR is con-
nected to a home antenna system, select
"NORMAL"; select "CATVI" when your VCR
is connected to e cable antenna. Switching
is performed between "NORMAL", "CATVI"
and "CATV2" on the TV screen every time
button "1" is pressed.
NOTE: Usually select "CATVI" when your
VCR is connected to a cable antenna.
"CATV2" is to be selected in special cases.
See page 21 for details.
E20
Original menu