Changing Pws Settings - NEC 4400 - SuperScript Color Laser Printer User Manual

Changing PWS Settings

This section describes changes you must make to Microsoft's
Personal Web Server for it to work as a Pull Printing Server.
You will need to
• Set the home directory
• Add two virtual directories.
Setting the Home directory
1. If there is a Personal Web Server icon in the tool tray
(lower right-hand corner of your screen), double-click the
icon to bring up the Personal Web Manager. Otherwise,
press the Windows Start button, select Programs, select
Microsoft Personal Web Server, and select the Personal
Web Manager.
2. Click on the Advanced button located on the left-hand
side of the screen.
3. In the Virtual Directories groupbox, highlight Home and
click the Edit Properties button.
4. You need to select the htdocs directory as your home
directory. If you already have an htdocs directory,
specify it as your home directory. If not, the Installation
Program for the Pull Printing Server added one for you
under your Personal Web Server's root directory (i.e.
C:\Inetpub\). Enter that as the path to the htdocs
directory, i.e.,
C:\Inetpub\htdocs
note:
If you were previously using the Personal Web
Server as a web server, you must move any files you need
from your original home directory to the
directory.
5. In the Access groupbox, select Read and Scripts and
de-select Execute.
Adding Virtual Directories
If you already have a cgi-gin directory at the same level as the
htdocs directory, and a virtual directory called cgi-bin which
points to the cgi-bin directory, you can skip the first five steps
below.
If the Pull Printing Server Installation Program did not detect
a cgi-bin directory on the same level as the htdocs directory, a
cgi-bin directory was added for you.
Follow the steps below create a virtual directory which
points to the cgi-bin directory.
1. Click the Add button in Advanced Options.
2. Enter the fully qualified path of your cgi-bin directory
3.
4.
5.
You will now add a wwwprnt virtual directory.
1.
2.
3.
4. In the Access groupbox, select Read and
5. Click OK.
6.
htdocs
(e.g. C:\Inetpub\cgi-bin).
Enter cgi-bin as the Alias.
In the Access groupbox, select Read and Execute and
de-select Scripts.
Click OK.
Click the Add button in Advanced Options.
Enter the path to your wwwprnt directory. This is located
in your \windows\system directory.
Enter wwwprnt as the Alias.
de-select Scripts and Execute.
Exit the Personal Web Manager.
Pull Printing 65