Making Prints From Your Memory Card; Inserting A Memory Card - Epson Stylus Photo RX640 series Basic Operation Manual

Making Prints From Your Memory Card

You can print photos from your digital camera by
inserting its memory card in your EPSON STYLUS
PHOTO RX. If you have a PictBridge - or USB
DIRECT-PRINT-enabled camera, you can connect it to
the EPSON STYLUS PHOTO RX with a USB cable (&
page 29).
After inserting your memory card, you can select
photos by viewing them on the LCD screen or by
printing and scanning an index sheet.
Note:
If your camera supports DPOF (Digital Print Order Format), you can
pre-select the photos you want to print while the card is still in your
camera (& page 19).

Inserting a Memory Card

Compatible cards and inserting
positions
You can use the following types of memory cards with
your EPSON STYLUS PHOTO RX:
Slot Type of Card
Smart Media
xD-Picture Card
xD-Picture Card Type M
Slot
c
Caution:
Make sure you check which direction the card should be inserted,
and if the card needs an adapter make sure you attach the adapter
before inserting the card. Otherwise, you may not be able to remove
the card from the EPSON STYLUS PHOTO RX.
Make sure the photos on your card meet these
requirements:
Media format DCF (Design rule for Camera File system)
version 1.0 or 2.0 compliant
File format JPEG or TIFF, DOS FAT (FAT 12 or 16, one
partition) taken with a DCF version 1.0 or
2.0 compliant digital camera
Support Exif Versions 2.21
Image size 80 x 80 pixels to 9200 x 9200 pixels
Number of files Up to 999
Making Prints From Your Memory Card
Type of Card
Memory Stick
Memory Stick PRO
MagicGate Memory Stick
Memory Stick Duo*
Memory Stick PRO Duo*
MagicGate Memory Stick Duo*
SD Memory Card
MultiMediaCard
miniSD card*
*Adapter required
Compact Flash
Microdrive
15