Plain Paper; Print Positions - Epson Stylus Photo RX640 series Basic Operation Manual

Setting Description
Saturation Select from Highest, Higher,
Standard, Lower, or Lowest.
Print Info. Set this to On to print your camera's
exposure time (shutter speed), F-stop
(aperture), and ISO speed.
Small Image Set this to On to remove digital noise
and improve the quality of low
resolution images.
Note:
This function does not work if Auto
Correct is set to None.
Fit to Frame If your photo is too long or wide to fit
inside the available space on your
selected layout, part of it is
automatically cropped (when this
setting is On). Select Off to turn off
automatic cropping and leave white
space at the edges of the photo.
Bidirectional Increases the print speed when turned
On. Select Off to improve the print
quality (but your photos print more
slowly).
Borderless Adjust the margins that are trimmed
when you select Borderless.
Expansion
Standard: No margins are printed.
Mid: The expansion rate is low. (The
Min: The expansion rate is lower than
PIF Relation If each photo has a P.I.F. frame
specified for it, select On to print your
photos according to the related P.I.F.
layouts.
9. Press the x Start button to print your photos.
If you need to cancel printing, press the
y Stop/Clear Settings button.
Selecting the Layout
These photo layouts are available when making your
print settings (& page 16). Select Layout, press the r
button, and then use the u or d button to select one of
the following layouts.
Setting Description
Borderless Prints your photo all the way to the edges
of the paper.
18
Making Prints From Your Memory Card
margins might be printed.)
Mid. (The margins might be
printed.)
1. Select
Layout.
2. Select
layout
options.
Setting Description
Border Prints your photo with a white margin
around the edge.
Upper Half Prints your photo on the upper half of the
paper.
2-up Prints two photos per sheet.
4-up Prints four photos per sheet.
8-up Prints eight photos per sheet.
20-up Prints 20 photos per sheet.
Index Prints 80 photos on A4 size paper.
Note:
When Index is selected, the Auto
Correct and Filter functions are not
available.
16-up Prints 16 photos on one sticker sheet. If
you select only one photo, 16 copies of
the same photo are printed. If you select
two or more, one copy of each is printed
in a 16-up layout.
Note:
For most multi-photo layouts, one copy of each selected photo is
printed. If you have selected Print Cropped Photos, multiple copies
of the cropped photo only are printed.
Adjusting the print position on a Photo
Stickers sheet
If your printed image is not centered on the Photo
Stickers sheet, you can adjust its printing position. If
necessary, print a test sample using a blank sheet of

plain paper.

1. Press the q Setup button.
2. Use the u or d button to select Stickers Position
Up-Down or Stickers Position Left-Right, then
press the r button.
3. Use the u, d, l, or r buttons to adjust the stickers

print positions.

4. Press OK when you finish making your settings.
Print Position Description
Options
Stickers Select to finely adjust the Photo
Position Stickers sheet position. You can adjust
Up-Down it by 0.1 mm from -2.5 to + 2.5 mm up
and down.
Stickers Select to finely adjust the Photo
Position Stickers sheet position. You can adjust
Left-Right it by 0.1 mm from -2.5 to + 2.5 mm left
and right.