Operating Instructions - Sharp EC-12TWT9 Operation Manual

OPERATING INSTRUCTIONS
/
/
/
/,
ON/OFF SWITCH
Ir
1
To turn on the vacuum cleaner, touch
the switch on the appliance to the
=ON" position. (Fig. 6)
2
To turn off the vacuum cleaner,
touch the switch to the "OFF" posi-
tion. (Fig. 7)
Fig.6
POWER CONTROL SWITCH
(EC-14TWT6/14TAT6/12TWT6 only)
A slide switch allows selection of any cleaning
power from low "L" to high "H". To increase the
suction power, slide the switch toward the "H"
position.
To decrease the suction power, slide the switch
toward the "L" position. (Fig. 7)
Power Control Knob
HIGH:
Greatest suction powe_r for heavy vacuuming
jobs. Medium power levels may be set
between "H" and "L".
LOW:
Low suction power for delicate cleaning jobs.
• |1 ii i
Fig. 7
6
DUST INDICATOR (EC-14Tw'r6/14TAT6/12TWT6
only)
#..-
When the indicator enters the red area, re-
place the full paper bag with a new genuine
Sharp TWIN PLY_Micro-Filtration paper bag.
(Fig. 8)
NOTE:
Dust Indicator
Red area
00000000
Fig. 8
If the vacuum cleaner takes in excessive amounts of fine dust, the indicator may
enter the red area even if the paper bag is not filled,.
If the vacuum cleaner takes in excessive amounts of fiber (thread, cottony material
etc.), the indicator may not enter the red area even if the paper bag is filled.
Should either of the above occur, it is recommended that the paper bag be replaced with
a Sharp TWIN PLYTMnew paper bag.
i | II I