Connecting A Dvd Player Or Satellite Receiver And A Vcr - Toshiba 57H82 Owner's Manual

Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs, and record one TV channel while watching another
channel.
You will need:
• three (or four, if satellite receiver is used) coaxial cables (one or
more may be provided by your cable or satellite company)
• two sets of standard A/V cables
• one pair of audio cables
• one S-video cable (between the TV and DVD player/satellite
receiver)
Stereo VCR
From
Antenna
TV
Note:
For the highest possiblepicture quality from
a non-ColorStream DVD player/satellite
receiver,use an S-video cable between the
TVand DVD player/satellite receive_ (If your
DVD player or satellite receiver has
component video,see page 11).
Do not connect both an S-video cable and
a standard video cable between the TVand
DVD player/satellite receiverat the same
time, or the picture performance will be
unacceptable.
Do not connect the DVD player/satellite
receiver and VCRto the same video channel
on the T_ (The illustration at left shows the
DVD player/satellite receiver connected to
Video-1 on the TV,and the VCRconnected
to Video-2 on the T_)
Theunauthorized r ecording, use,distribution,
or revision oftelevision programs, videotapes,
DVDs, a ndothermaterials is prohibited u nder
the Copyright Lawsofthe United Statesand
othercountries, andmaysubject y outo civil
andcriminal l iability.
From
Satellite
Dish
• % Satellite Receiver