Connecting Two Vcrs; Connecting A Camcorder - Toshiba 57H82 Owner's Manual

Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from
one TV channel while watching another TV channel.
You will need:
• two coaxial cables (one or more may be provided by your cable
company)
• two sets of standard A/V cables
VCR1
From Antenna
TV
VCR2
!
Note:
Ifyou have S-VHS VCRs,use S-video cables
instead of standard video cables for better
picture performance. Do not connect both a
standard video cable and an S-video cable to
Video-1 (or Video-2) at the same time, or the
picture performance will be unacceptable.
Do not connect the same VCR to the output
and inputjacks on the TVat the same time.
Todub or edit, VCR2 must select Line/IV,
and the TVmustse/ect VIDEO 1 (see
"Selectingthe antennainput" on page 21.).
* The VideoOUTjack does not output the
POPpicture.
** TheAudio OUTjacks can output the sound
of either the Main or POPpicture (see
"Selectingthe Audio OUT sound" on
page 51).
Theunauthorized r ecording, use,distribution,
or revision oftelevision programs, videotapes,
DVDs, a ndothermaterials isprohibited under
the Copyright Lawsofthe United States and
othercountries, andmaysubject y outo civil
andcriminal l iability.
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of standard A/V cables
Camcorder
Note:
Ifyou have an S-VHScamcorder, use an S-
video cable between the S-videojacks on the
camcorder and TVinstead of the standard
video cable. Do not connect both a standard
video cable and an S-video cable at the same
time, or the picture performance will be
unacceptable.
Video-3 (front panel)
13