Manually Adjusting The Color Convergence - Toshiba 57H82 Owner's Manual

Manually adjusting the color convergence
1. Press MENU, and then press "_ or _ until the PICTURE menu
appears.
2. Press A or • to highlight CONVERGENCE (below left).
3. Press "9 or _ to display the Center Convergence menu (below
right).
®@@©@@
piC TURE ANTENNA
MODE SPORTS
A
VLESH TONE ON
TEMPERATURE COOL
SAVE NF'W r
t
BLUE
_) TO ADJUST
ENTER TO SELECT COLOR
EX I T TO SELECT POS I T I ON
If you see separate red, blue, or green crossed lines (or red or blue
shadows next to white lines), you need to adjust the convergence.
4. Press ENTER to highlight RED or BLUE, depending on which
color needs adjusting. If both red and blue need adjusting, you
will need to perform steps 4 and 5 twice.
5. Press A (up), •
(down), _
(left), or !_ (right) on the remote
control to converge the red or blue line into the green line, which
will turn completely white when correctly adjusted. When color
convergence is correctly adjusted, you will see two single crossed
white lines.
6. Press EXIT to display the Circumference Convergence menu.
7. Press the corresponding Number button (1-4 and 6-9) to select
the area you want to adjust.
m m m
Number
MENU/ENTER
EXIT
I + I
m m m
8. Press ENTER to highlight RED or BLUE, depending on which
color needs adjusting. If both red and blue need adjusting, you
will need to perform steps 8 and 9 twice _)r the selected area.
-4-
RED
@ :TO ADJUST
ENTER :TO SELECT COLOR
EXIT :TO SELECT POSITION
9. Press A•'q _ to converge the red or blue line into the green line,
which will turn completely white when correctly adjusted. Repeat
steps 8 ,-rod9 until you see two single crossed white lines.
10. Press EXIT once to select another area to adjust, and then repeat
steps 7-9.
11. Press EXIT twice to close the Convergence menu.
25