Connecting Two Vcrs - Toshiba COLORSTREAM 43A10 Owner's Manual

From Antenna
Stereo VCR
TV
I
Caution:
_ p/ay from the DVD, the DVD and TV must
use Co/orStream connections. _ record from
the DVD, the DVD and TV must se/ect Video.
Theunauthorized recording of te/evision
programs, video tapesand other materia/s
may infringe upon the provisions of copyright
laws.
DVD Player With ColorStream
TM
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a video program. You will also be able to
record from one TV channel while watching another channel.
You will need:
* one coaxial cable
* two pairs of audio cables (two single cables for mono VCRs)
* two video cables
VCR1
From Antenna
TV
Caution:
Do not connect one VCR to the output and
input jacks on the TV at the same time. ff you
are using an S VHS VCR, use the S video
connections and remove the video cab/e. Do
not connect the video cab/e and the S video
cab/e to Video 7 simu/taneous/_
Theunauthorized recording of te/evision
programs, video tapesand other materia/s
may infringe upon the provisions of copyright
laws.
Note:
, _ dub or edit, VCR 2 must se/ect Line IN,
and the TVmust se/ect Video 7.
* Audio OUT jacks can output either sound
of Main or PIP picture being displayed on
the screen. (See "Se/ect/ng the Audio OUT
sound" on page 4 7.3
** Video OUT jack does not output the PIP
picture.
VCR2
8