Siemens SIMATIC NET Manual page 186

13 SIMATIC NCM PC Project Engineering Tool
S Online mode - local (configuration station and PC station identical)
This situation occurs when the configuration system is installed on the PC station
(engineering station).
In this case, the configuration data are transferred directly over an internal PC
connection. Within the configuration system you still use the known mechanisms
for accessing the target system as in case a).
Follow the steps below:
Procedure for "Downloading Project Engineering Data to the PC
1. Make sure that the following requirement is met:
The access point of the application must be set as follows:
S7ONLINE (STEP7) -> PC internal (local)
2. Select the station you want to download to.
3. Download the configuration data with PLC -> Download
186
Station" -
Online - Local
Commissioning PC Stations - Manual and Quick Start
Download
Tool
Set PG/PC
Interface
NCM PC / STEP 7
NCM PC / STEP 7
Release 5/2005
C79000-G8976-C156-07