Siemens SIMATIC NET Manual page 291

The Timeout Parameter
This parameter is specified in section [<connectionname>].
The connection name contains the IP address from the iMap project engineering
(network view) and the PROFInet device name configured in iMap.
Parameter
Syntax
Purpose
Default
Possible Values
The QualityOfStateValue Parameter
This parameter is specified in section [<connectionname>].
The connection name contains the IP address from the iMap project engineering
(network view) and the PROFInet device name configured in iMap.
Parameter
Syntax
Purpose
Default
Possible Values
Commissioning PC Stations - Manual and Quick Start
Release 5/2005
C79000- G8976- C156- 07
B Description of the PROFINET Configuration File
[192.11.2.34|S7-300 Station (1)]
Timeout = 15000
The "Timeout" parameter is an error monitoring
time. If a pending job cannot be processed within
this monitoring time, the job is acknowledged with
an error.
15000
milliseconds
[192.11.2.34|S7-300 Station (1)]
QualityOfStateValue = 100
The required QualityofServiceValue is used to
restrict the frequency of transmission of data on a
partner device. It describes the required update
quality of the data. Process value on the partner
device are updated at this sampling rate.
100 (the cycle time of the PROFInet OPC Server)
milliseconds
Meaning
Meaning
291