Setting The Water Hardness Level Selector In The Wash Cabinet - Miele G 663 Operating Instructions Manual

Before using for the first time
Setting the water hardness level
selector in the wash cabinet
The water hardness level selector in the
wash cabinet must be set according to
the table below.
Setting the selector to the correct set-
ting will help minimise the effects of the
wash process on glass surfaces. Too
high a setting will lead to poor cleaning
results and an increase in water spots
left on crockery and cutlery.
Use a screwdriver to take the cover
off the water hardness level selector
in the wash cabinet.
18
Use a coin or screwdriver to adjust
the water hardness level selector in
the wash cabinet. There is a click as
each setting is reached.
°d mmol/l
1- 7 0.2- 1.3
8-10 1.4- 1.8
11-14 2.0- 2.5
15-70 2.7-12.6
The water hardness selector is set at the
factory to setting "1".
Example:
For a water hardness level of 6 °d.
Turn the water hardness level selec-
tor to setting 3 (1 - 7 °d).
Replace the cover on the water hard-
ness level selector.
°f Selector-
setting (level)
2- 13 3
14- 18 2
20- 25 1
27-126 0