Changing A Programme; Interrupting A Programme - Miele G 663 Operating Instructions Manual

The dishwasher can now be unloaded
(see "Unloading the dishwasher").
Do not touch the heating element
during or directly after the end of a
programme. You could burn your-
self.
If the dishwasher is not to be used for a
longer period of time, e. g. whilst on
holiday, it is recommended that the
stopcock is turned off.

Changing a programme

A change can be made to the pro-
gramme selected before the door is
closed:
Press the touch pad for the new pro-
gramme required.
Close the door.
The programme starts.
If a programme has already begun,
change the programme as follows:
Open the door.
Press the "Off" touch pad (16).
Press the "On" touch pad (15).
Press the touch pad for the required
programme.
Close the door.
The programme starts.
Operating the dishwasher

Interrupting a programme

A programme is interrupted as soon as
the door is opened.
If the door is closed again, the pro-
gramme will continue from the point it
was at before the door was opened.
Warning
Water in the dishwasher may be
hot. Danger of scalding.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before clos-
ing the door again, leave it ajar for
approx. 20 secs. This will enable
the temperature in the wash cabinet
to settle. Close the door firmly mak-
ing sure that it clicks into place.
Do not touch the heating element
during or directly after the end of a
programme. You could burn your-
self.
37