Miele G 663 Operating Instructions Manual page 51

Problem
The dishwasher stops
during a programme
Possible cause
Water intake is restricted.
The "Inlet/Outlet"
indicator light in the top
of the opened door
flashes.
Water outlet is restricted,
water remains in the
wash cabinet at the end
of a programme. The
"Inlet/Outlet" indicator
light in the top of the
opened door flashes.
Problem solving guide
Remedy
Before rectifying the
problem you must:
Switch the dishwasher off.
– Open the stopcock
fully.
– Check the water inlet
filter and clean if
necessary, see
"Cleaning the water
inlet filter".
– Check the water level
and if necessary
increase the water
intake time, see
relevant sections.
Before rectifying the
problem you must:
Switch the dishwasher off.
– Clean the filter
combination, see
"Cleaning and Care".
– Clean the drain pump,
see "Cleaning the
drain pump and non-
return valve".
– Clean the non-return
valve, see "Cleaning
the drain pump and
non-return valve".
– Remove any kink in the
drain hose.
51