Problem: Lan Settings In The Browser Are Using A Proxy Server - NEC Express5800/320Ma User Manual

To reset the security setting for specific VTMs
1. On the Internet Explorer Tools menu, click Internet Options.
2. Click the Security tab.
3. Click the Local intranet icon, and then click Sites.
4. In the Local intranet dialog box, click Advanced.
5. In the additional Local intranet dialog box, type the IP address of each VTM next
to Add this Web site to the zone, and click Add. After entering all the VTMs to
which you want to connect, click OK twice to close both Local intranet dialog
boxes.
6. On the Security tab, under Security level for this zone, move the slider to the
Medium position or lower, and click OK.

Problem: LAN Settings in the Browser Are Using a Proxy Server

Symptom. A pop-up window warns: Internet Explorer could not open the
Internet site http://IP_address_of_Virtual_Technician_Module or
A connection with the server could not be established; or a page
displays the warning The page cannot be displayed.
Although other problems can cause this symptom, typically the cause is that the LAN
settings in Internet Explorer are using a proxy server.
Resolution. Specify settings to prevent Internet Explorer from using a proxy server to
connect to the VTMs.
To prevent Internet Explorer from using a proxy server to connect to the VTMs
1. On the Internet Explorer Tools menu, click Internet Options.
2. Click the Connections tab, and then click LAN Settings.
3. If Use a proxy server is selected, do one of the following:
•
If the IP addresses of the VTMs are recognized as local addresses and the
security settings on the proxy server permit, click Bypass proxy server for
local addresses. Click OK twice to close the Local Area Network (LAN)
Settings dialog box and the Internet Options dialog box.
•
If the IP addresses of the VTMs are not recognized as local addresses, click
Advanced. Under Exceptions, type the IP addresses of the VTMs next to Do
not use proxy server for addresses beginning with. Click OK three times to
close the Proxy Settings, Local Area Network (LAN) Settings, and Internet
Options dialog boxes.
Troubleshooting Connections to a VTM
Connecting to a VTM Console 2-7