Resetting The Operating System - NEC Express5800/320Ma User Manual

When the System Is No Longer Responding
To perform a non-maskable interrupt
1. On the VTM console, click the Troubleshoot Server tab, and then click NMI.
2. On the Confirmation dialog box, click OK.
Related Topics
•
"When the System Is No Longer Responding"
•

"Resetting the Operating System"

•
"Powering Off the System from the Manage Tab"
•
"Forcing the System to Power Off"
Resetting the Operating System
If the Express5800/320Ma system is not responding, and you have already performed
a non-maskable interrupt
the system controller
•
If the operating system is running, the system controller performs a
recovery, except that it skips the NMI.
•
If the operating system is not running, but standby power is available, the system
controller starts a full
!
If resetting the operating system does not resolve the problem, try
system.
To reset the operating system
1. On the VTM console, click the Troubleshoot Server tab, and then click Hard
Reset.
2. On the Confirmation dialog box, click OK.
Related Topics
•
"When the System Is No Longer Responding"
•
"Performing a Non-Maskable Interrupt"
•
"Powering Off the System from the Manage Tab"
•
"Forcing the System to Power Off"
3-4 Express5800/320Ma: Virtual Technician Module User's Guide
(NMI), try a hard reset from the
does one of the following:
fault-resilient
C A U T I O N
Before resetting the host system, make sure that no other
administrators are using the system.
VTM
boot.
console. In this process,
state-sensitive
powering off the