Viewing The Status Of The Connection To The System; Viewing The Network Settings - NEC Express5800/320Ma User Manual

Viewing the Status of the Connection to the System

Viewing the Status of the Connection to the System
To view the status of the connection from the
tab, and look in the Connector Status group box. The status is displayed as either
connected or not connected.
Related Topics
•
"When the System Is No Longer Responding"
•
"Viewing the System Event Log"

Viewing the Network Settings

Network settings comprise information about network connections for the VTM.
Network connections are configured in the
configuration instructions, see the online Help for ftSMC.
To view network settings
1. Click the Card Info tab.
In the Network group box, the MAC address assigned to the VTM port is displayed
next to Ethernet Address.
2. In the Network group box, click Network Settings.
The fields in the Ethernet group box are:
•
IP Address. IP address for the LAN connection to the VTM.
•
Netmask. Subnet mask number for the LAN.
•
Gateway IP. Gateway IP address for the LAN.
•
Use DHCP. Check box indicating whether IP addresses are obtained from a
DHCP server. If the check box is not checked, static IP addresses are
assigned.
The fields in the PPP group box are:
•
IP Address. IP address used for the PPP connection between the
Express5800/320Ma system and the VTM.
•
Netmask. Subnet mask number for the PPP connection.
3. When you finish viewing the settings, click Close.
Related Topic
•
"VTM System Operation and Configuration"
5-2 Express5800/320Ma: Virtual Technician Module User's Guide
VTM to the system, click the Card Info
ftServer Management Console (ftSMC). For