Configuring and Connecting Remote Storage Devices
Troubleshooting AVR Sessions
If the keyboard does not work in an
in the AVR window. If the keyboard still does not work, click the Settings menu, and
ensure that View-Only Mode is not selected.
Related Topics
•
"Using AVR in View-Only Mode"
•
"Starting and Ending an AVR Session"
•
"Managing AVR Sessions"
Configuring and Connecting Remote Storage Devices
In a
VTM console
connected to your local computer. You can use this storage device to install, copy, or
move files to and from the Express5800/320Ma system.
You can mount up to three different storage devices on the system simultaneously. The
device can be a floppy disk drive, a CD-ROM drive, or an
appears at the server's USB port when the operating system is loaded. ISO image files
must reside on the
The iSCSI server that is built into the VTM console provides images of hard disks,
floppy disks, or CD-ROM drives, and emulates these devices.
To mount remote storage devices
1. Configure one of the following local devices so that you can connect it to the host
system:
•
CD-ROM or floppy disk drive
•
ISO image file
2.
Connect the device to the Express5800/320Ma
Related Topics
•
"Configuring a CD-ROM or Floppy Disk Drive as a Remote Storage Device"
•
"Configuring a Local ISO Image File as a Remote Storage Device"
•
"Connecting a Configured Local Storage Device to the Host"
4-10
Express5800/320Ma: Virtual Technician Module User's Guide
Advanced Video Redirection
session, you can mount on the
client
PC.
(AVR) session, click
host system
a storage device that is
ISO image
system.
file. The device