4-58
Configuring Your Storage and I/O Blade
Reconstruction
Described below are procedures based on assumption:
Add a Hard Disk Drive to a RAID5 VD configured with three Hard Disk Drives to make a RAID5
VD configured with four Hard Disk Drives.
1.
Start WebBIOS on POST screen of CPU blade.
Make sure that the status for the added Hard Disk Drive is indicated as "Unconfigured
Good" in the right frame of the Top Menu.
2.
Select a VD you want to reconstruct (VD 0 in the example) from the right frame of Top
Menu.
3.
Setting menu for VD is displayed.