Names And Functions Of Components; Front View - NEC Express5800 series User Manual

2-4 General Description

NAMES AND FUNCTIONS OF COMPONENTS

This section describes the names and features of the components in the device.

Front View

1 Hard disk drive
Upper: Slots 0, 1, and 2 from left to right
Lower: Slots 3, 4, and 5 from left to right
2 POWER lamp
The lamp goes on green when the Storage and I/O Blade is powered on.
The lamp goes on amber when the Storage and I/O Blade is powered off but the power is
supplied from the power supply unit.
3 STATUS lamp (green/amber/red)
The lamp indicates the status of the Storage and I/O Blade. See "Lamp Indications" described
later for the indications and meanings of the lamp.
4 LAN1 Link/Access lamp (green)
The lamp lights when LAN port 1 is connected to the network.
The lamp flashes when data is being transmitted.
5 LAN2 Link/Access lamp (green)
The lamp lights when LAN port 2 is connected to the network.
The lamp flashes when data is being transmitted.
6 ID lamp (blue)
The lamp is intended to identify the Storage and I/O Blade in the system. The lamp is lit by a
software command.
7 Eject lever
Pull the lever to remove the Storage and I/O Blade from the Blade Enclosure.
1
0 1
2
1 2
3
1
3 4
7
2
ID
6
5
4
5