NEC Express5800 series User Manual page 103

4.
On the right of the screen, items required for reconstruction are displayed.
5.
Select "Migration with addition".
6.
Specify the RAID level used after reconstruction.
7.
Select a Hard Disk Drive to be added.
8.
When you finished Steps 5 to 7, click [Go] at the lower right of the screen.
9.
The progress of reconstruction is displayed on the lower left of the screen. Click [Home]
at the lower left of the screen to return to the WebBIOS Top Menu.
IMPORTANT:
The capacity of virtual drive may be incorrectly displayed after
reconstruction. In this case, perform Scan Devices from the Top
Menu.
Click [Home] while the background task such as Consistency Check,
Rebuild, or Reconstruction is being executed. With the progress
indication being displayed, the background task may be processed at
slow rate.
Configuring Your Storage and I/O Blade
Information of physical devices in
the DG in which a VD is defined.
Migration Only:
Allows change of RAID level.
Migration with addition:
Allows addition of physical
device and change of RAID
level.
4-59