NEC Express5800 series User Manual page 68

4-24
Configuring Your Storage and I/O Blade
Item
Select VDs to
Exclude CC
CC Start
(mm/dd/yyyy)
CC Mode
*1 Do not perform "Set Factory Defaults". If performed, the NEC's factory-set value will no longer
be restored.
*2 If Alarm Control is set to "Enabled", the CPU blade issues an alarm sound when the VD is
degraded due to failure of Hard Disk Drive.
*3 Set interval of scheduled consistency check in "CC Frequency" with sufficient allowance
because it is based on "CC Start Time".
Default Description
Unchecked Specify the VD to which the scheduled
consistency check is not performed.
Checked: Consistency check is not
performed on the selected VD.
Unchecked: Consistency check is
performed on every VD.
01/01/2000 Set the date to start the first consistency
check.
Sequential Sequential: Consistency check is
performed on several VDs sequentially.
Concurrent: Consistency check is
performed on several VDs
simultaneously.
Change
Permitted
Permitted
Permitted