Features Of The Anuj 3000/3500 - Panasonic UJ30 Series User Manual

The ANUJ 3000/3500 is an UV curing device that quickly hardens UV resins (inks, adhesives, and coatings)
via irradiation with UV light from an LED light source. The focused application of UV radiation to UV resins
coated on minute surfaces (2 to 3 mm dia.) such as the lenses of CD, MD, and DVD players, and the LCD
panels of notebook PCs, enables precise adhesion.
■High-power irradiation: 10,000 mW/cm
Higher radiation intensity and a wider range of applications. Shorter production cycles.
■Long LED life: 20,000 hours (LED life: Total irradiation time before UV intensity falls to 70% of
initial value)
At least six times longer LED life than a comparable lamp model, enabling reduced running costs.
■UV curing without temperature increases
Uses a single 365-nm LED UV light source that does not emit any infrared radiation, eliminating the risk of
heat damaging the workpiece.
■UV intensity stabilization
UV intensity is kept constant, even if the ambient or LED temperature changes.
■Easy-to-install LED head
At 12 mm dia. by 50 mm len., the LED is easy to mount on a jig. Mounting the LED head in place reduces
overheating and increases UV intensity.
■No cooling fan, enabling cleanroom use
There is no need to deal with exhaust.
■Programmable UV irradiation with four independently controlled heads
Each LED head can be controlled independently. The heads can also be controlled all together or in
combination. Up to eight different operation programs can be stored for each channel, including one program
for the constant intensity irradiation and seven programs composed of up to 10 steps each.
Program examples
Simple mode

1 Features of the ANUJ 3000/3500

UV
Constant
intensity
intensity
Time
1 Features of the ANUJ 3000/3500
2
(with ANUJ6423 lens)
Up to 7 programs can be set.
Program 7
Program 1
[Lamp type]
Four units need to be installed
separately for processes 1 to 4.
Fiber
Process 1 Process 2 Process 3 Process 4
One controller handles processes
1 to 4.
Process 1 Process 2 Process 3 Process 4
1