Panasonic UJ30 Series User Manual page 54

External control
6. Using the AUTO screen (only available in online mode)
... Displays all UJ35 controller information in real time.
... Enables irradiation START/STOP and emergency STOP control from computer.
・[TYPE]
・[STEP]
・[TIME(s)]
・[UV.PWR(%)]
・[TEMP.]
・[Replacement time(h)]
・[
Remaining time before replacement (h)
・[ERROR No.]
・[Total Irradiation time (h)] Shows cumulative time that LED head has been ON.
・[CH SELECT]
・BUSY ON/OFF
・READY ON/OFF
・START
・STOP
・RESET
・ERROR No.
---If Batch Download (Communication menu) is executed, values set in UJ35 controller are displayed.
44
• LED status for each CH differentiated by color
• When irradiation is possible, READY ON is highlighted
• If an error occurs, an error number is displayed
• Panel showing error list can be displayed at any time
• During irradiation START is highlighted
Shows current TYPE (0–7).
During irradiation, current STEP is displayed.
During irradiation, counts down the time remaining from the value that was set for the current STEP.
Continuous irradiation: Indicates the total irradiation time (so far) for the current step
During irradiation shows the UV strength for the current STEP.
Constantly shows the LED temperature for each connected CH.
Shows the LED head replacement time setting
] Shows remaining LED head life to when replacement is necessary.
When an error occurs, error number is displayed.
Uploads CH selection to the UJ35 controller.
Indicates BUSY ON/OFF status of each channel.
Indicates READY ALL ON/OFF status.
Also, indicates READY ON/OFF status of each channel.
Starts irradiation on all selected channels together.
Also used to start irradiation on individual channels.
During irradiation, performs emergency stop.
Resets errors.
Displays error list panel.