Timing Chart; Batch Irradiation - Panasonic UJ30 Series User Manual

Operation modes
6.4

Timing chart

1) Batch irradiation:

Heads selected
irradiation mode.
・ Preparation of batch irradiation: READY All is ON
・ Batch irradiation start: Press EMISSION button in front of the controller or turn on START ALL input
signal on the backside.
・ Batch stop: Press EMISSION button during irradiation or turn on STOP input on the backside.
① Batch timer irradiation
20
(*1)
with CH1 through 4 operation button in front of the controller are processed in batch
(*2)
.