Panasonic UJ30 Series User Manual page 35

■Product type switching table
Type No. Pin No.7
0 OFF
OFF
1
OFF
2
OFF
3
ON
4
ON
5
ON
6
ON
7
■ Operation via external signals
Output Specification
・Rated load voltage: 5 V DC to 28 V DC
・Max. load current: 100 mA (per 1 output)
When 5 V internal voltage is used, set the total of maximum load current to less
than 250mA.
・Maximum voltage drop is less than 0.9 V when output is given.
Pin No.6 Pin No.5
OFF OFF
OFF
ON
ON
OFF
ON
ON
OFF OFF
OFF ON
ON
OFF
ON
ON
External control
Remark
Product type switching is enabled when all
pins are off.
When an external signal is on, the product
type set by the external signal has priority.
* The green display will show a flashing "."
(period). Irradiation intensity and irradiation
time settings cannot be performed using the
controller.
25