Guidelines For Using Paper - Dell 1600n Multifunction Mono Laser Printer User Manual

Premature wear on the multi-function printer
NOTE: Some paper may meet all of the guidelines in this guide and still not produce satisfactory
results. This may be the result of improper handling, unacceptable temperature and humidity levels,
or other variables over which Dell has no control.
NOTE: Before purchasing large quantities of paper, insure the paper meets the requirements specified
in this User's Guide.
CAUTION: Using paper that does not meet these specifications may cause problems,
requiring repairs. These repairs are not covered by the Dell warranty or service
agreements.
Supported Sizes of Paper
Paper
Letter 8.5 X 11 in.
(216 X 279 mm)
A4 8.3 X 11.7 in.
(210 X 297 mm)
Executive 7.25 X 10.5 in.
(191 X 267 mm)
Legal 8.5 X 14 in.
(216 X 356 mm)
Folio 8.5 X 13 in.
(216 X 330 mm)
Minimum size 3 x 5 in.
(custom) (76 x 127 mm)
Maximum size 8.5 x 14 in.
(Legal) (216 x 356 mm)
Transparency Same minimum and
maximum paper sizes as
Labels
listed above.
Cards
Envelopes
a. The multi-function printer supports a wide range of media sizes.
b. Capacity may vary depending on print materials' weight and thickness, and environmental conditions.
NOTE: You may experience jams when using print materials with a length of less than 127 mm (5
inches). For optimum performance, ensure that you are storing and handling the paper correctly.
Please refer to page

Guidelines for Using Paper

a
Dimensions
60-120 g/m
bond (16-32 lb)
138-146 g/m
120-150 g/m
90-163 g/m
75-90 g/m
203.
Weight
2
60-90 g/m bond
(16-24 lb) for the
paper tray
2
60-163 g/m bond
(16-43 lb) for the
manual feeder
2
1 sheet of paper for the
manual feeder
2
2
2
2
b
Capacity
250 sheets of 75
2
g/m bond (20 lb)
paper for the paper
tray
1 sheet of paper for
the manual feeder