Clone Copying - Dell 1600n Multifunction Mono Laser Printer User Manual

document is detected in the ADF, the Auto Fit does not work.
NOTE: You cannot adjust the copy size using the <Reduce/Enlarge> (
Fit copying is enabled.
To make the Auto Fit copying:
1. Load the document to be copied on the scanner glass, and close the document cover.
2. Press <Layout>.
3. Press <Layout> or the scroll button ( or
4. Press <Select> to save the selection.
5. If necessary, customize the copy settings including the number of copies, contrast, and image quality
by using the operator panel buttons. See
6. Press <Start Copy> to begin copying.

Clone Copying

This special copy mode can be applied when you load a document using only the scanner glass. If a
document is detected on the ADF, the Clone copying feature does not work.
NOTE: You cannot adjust the copy size using the <Reduce/Enlarge> (
clone copy.
To make the Clone copying:
1. Load the document to be copied on the scanner glass, and close the cover.
2. Press <Layout>.
3. Press <Layout> or the scroll button ( or
4. Press <Select> to save the selection.
5. If necessary, customize the copy settings including number of copies, contrast, and image quality by
using the operator panel buttons. See
6. Press <Start Copy> to begin copying.
) until "Auto Fit" displays on the bottom line.
"Setting Copy Options" on page
) until "Clone" displays on the bottom line.
"Setting Copy Options" on page
or ) button while the Auto
98.
or ) button while making a
98.