Graphics Tab - Dell 1600n Multifunction Mono Laser Printer User Manual

Property
Copies allows you to choose the number of copies to be printed. You can enter up to 999.
Copies
The Size option allows you to choose the size of paper loaded in the paper tray.
Size
If the required size is not listed in the Size box, click Add Custom. When the Custom Page
Size Custom Pages Names... window appears, set the paper size and click Ok. The setting
appears on the list so that you can select it.
Make sure that Source is set to the corresponding paper tray.
The Manual Feed source is used when printing to special materials. You need to load one
Source
sheet at a time into the manual feeder. See
If the paper source is set to Auto Select, the multi-function printer automatically picks up
print materials from the manual feeder first and then the paper tray.
Make sure that Type is set to Printer Default. If you load a different type of print material,
select the corresponding paper type. For more information about print materials, refer to
Type
"Paper Handling" on page
If you are using cotton paper, set the paper type to Thick for the best results.
If you are using recycled paper or color paper, select Color Paper.
This setting allows the first page of a print job to be taken from a different paper source.
First
Page

Graphics Tab

Use the following graphic options to adjust the print quality for your specific printing needs. See
more information about accessing printer properties.
Click the Graphics tab to display the properties shown below.
Description
page 64.
47.
page 71 for