Dell 1600n Multifunction Mono Laser Printer User Manual page 23

To connect the multi-function printer to a computer:
1. Make sure the multi-function printer, computer, and any other attached devices are powered off and
unplugged.
2. Connect a USB cable to the USB connector on your multi-function printer.
3. Connect the other end of the cable into an available USB port on the computer, not the USB keyboard.
Connecting the Multi-Function Printer to the Network
1. Make sure the multi-function printer, computer, and any other attached devices are powered off and
unplugged.
2. Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network cable into a LAN drop
or hub, and the other end into the Ethernet network port on the back of the multi-function printer. The
multi-function printer automatically adjusts for the network speed.
NOTE: After connecting the multi-function printer, you need to configure the network
parameters on the operator panel. See page 147 .