Moving The Camera To A Preset Position (Common Operations In Area Zoom And Vector Dragging Modes); Using Pan/Tilt/Zoom Operations With The Displayed Control Bar (Ptz Control Bar Only); Controlling The Camera On A Panorama Image; Facing The Camera Toward A Specified Point - Sony Ipela SNC-ER585 User Manual

Moving the camera to a preset
position (Common operations in
Area zoom and Vector dragging
modes)
Select a preset position name from the Preset position
panel. The camera will move to the preset position that
you have stored in memory using the Preset position
menu (page 69).
Multiple preset positions can be organized by group
according to setting.
Using pan/tilt/zoom operations with
the displayed control bar (PTZ
Control bar only)
Pan/Tilt operations
Click the arrow of the direction you wish to move the
camera. Continue clicking on the arrow to keep moving
the direction of the camera.
Zoom operation
Click to zoom out, click
operation continues while you are clicking on the
button.
28

Controlling the Camera on a Panorama Image

to zoom in. The zoom
Controlling the Camera
on a Panorama Image
In the panorama window, a 360° view around the camera
is displayed as a panorama image. When you click on
the displayed panorama image, the camera faces the
clicked area.
Panorama window
To create a panorama image
Create the panorama image with the SNC toolbox. See
page 105 for details.
Tip
The panorama image is a still picture converted from the
image taken when you were going to create it with SNC
toolbox. When the camera is moved or when the layout
around the camera is changed, you should create the
panorama image again.
Facing the camera toward a
specified point
1
Create a panorama image with SNC toolbox and
display it.
Map View
Two "Panorama Image" display formats are
available: Map view and Arctic view.
You can switch the display. Click
Map View and to display Arctic View.
Arctic View is not available on SNC-EP520/
EP521/EP550/EP580/ZP550.
SNC-EP580
Arctic View
to display