Saving The Camera Position And Action; Position At Alarm; Preset Position Menu; Home Position Setting - Sony Ipela SNC-ER585 User Manual

Saving the Camera
Position and Action

Preset position Menu

When you click Preset position
menu, the Preset position menu appears. This allows you
to save the camera's pan, tilt and zoom positions and set
position tours (programmed action of the camera).
The Preset position menu consists of 2 tabs: Position
and Tour (position).
The Preview screen is displayed.
Position Tab — Saving pan/tilt/
zoom position
You can set up to 256 camera positions (pan, tilt and
zoom positions).
Preview screen
This screen is for monitoring images and setting preset
positions.
For details of each button, please refer to the Control bar
of the Plug-in free viewer (page 25).

Home position setting

Set the current camera position as the home position.
Set
Click to save the current pan, tilt and zoom positions as
the home position. To move the camera to the home
position, click in the control panel (page 23).
—
in the Administrator
Reset
Click to reset the home position to the factory-set
position.

Position at alarm

The camera can synchronize a preset position with
Sensor input or with the detection functions.
If an alarm is detected by the sensor input or the
detection functions, the camera automatically moves to
the corresponding preset position.
If you do not want to synchronize with any preset
number, select none.
Sensor input 1 (S1)
Select a preset position to synchronize with the alarm
from Sensor input 1.
Sensor input 2 (S2)
Select a preset position to synchronize with the alarm
from Sensor input 2.
Camera tampering detection (TP)
Select the preset position to synchronize with the camera
tampering detect alarm.
Motion Detection (MD)
Select a preset position to synchronize with the alarm
from the motion detection.
Click Detection, and the motion detection menu is
displayed to allow you to set the motion detection
function (page 90).
Note
In the case where the synchronized preset position is
specified, an alarm event that happens when the camera
moves to the preset position will be invalid.
Preset
You can configure and save preset positions and
thumbnails. Click Call to move the camera to a specified
preset position and click Clear thumbnail to delete the
thumbnail information for the specified preset position.
No.
Select a preset number from 1 to 256 from the drop-
down list.
Name
Type the preset position name of the selected preset
number using up to 32 characters.
Set
Click to save the current camera position to the selected
preset number.
To save a preset position, operate as follows:
Saving the Camera Position and Action — Preset position Menu
69