Privacy Masking Tab - Sony Ipela SNC-ER585 User Manual

Saturation
Select the saturation in 7 steps, from –3 to +3.
Selecting +3 provides the highest image saturation.
Sharpness
Select the sharpness in 7 steps, from –3 to +3.
Selecting +3 provides the sharpest picture.
Contrast (SNC-EP520/EP521/ER520/
ER521)
Select the contrast in 7 steps, from –3 to +3.
Selecting +3 provides the highest contrast.
OK/Cancel
See "Buttons common to every menu" on page 35.

Privacy Masking tab

Using the privacy masking enables you to hide images
by masking specified parts of the images when
streaming.
Preview screen
This screen is for monitoring images and configuring
privacy masking.
For details on each button, refer to the Control bar of the
Plug-in free viewer (page 25).
Control buttons
The control buttons are located at the top of the preview
screen.
You can operate the camera with these buttons.
Pan/Tilt operation
Click the button of the direction you wish to move the
camera.
Zoom operation
Available by clicking - to zoom out and + to zoom in.
Position
Available to call out the privacy masks, delete them one
by one or delete all at one time.
After completing the configuration, register by clicking
OK.
Call: Clicks the button to turn the camera facing to the
position where the privacy mask is set.
Clear: Click the button to delete the privacy mask set.
All clear: Click the button to delete all privacy mask.
Color
Specify the color of privacy masks. This setting is
common to every privacy mask.
The colors used are as follows:
Black, Gray1, Gray2, Gray3, Gray4, Gray5, Gray6,
White, Red, Green, Blue, Cyan, Yellow, Magenta
Setting a privacy mask
Operate according to the following procedure to set a
privacy mask in the position of your choice:
1
Face the camera to the position where you want to
set a privacy mask using the control button on the
preview screen.
2
Specify the privacy mask area by dragging the
mouse on the preview screen.
The privacy mask area is formed as a rectangle that
is symmetrical to the center of the preview screen.
3
Select the number to register from the Position
drop-down list.
4
Select the color of the mask from the Color drop-
down list.
5
Click OK.
The mask is displayed on the preview screen.
Note
• The mask cannot be set on the viewer by clicking OK
if the camera is tilted beyond +65°.
• If you change the direction of the camera, the mask
may not cover the object properly. Ensure the Privacy
masking area is sized sufficiently beforehand.
• The color is common to every privacy mask. The color
selected last is applied.
Privacy mask setting range
The setting range of the privacy mask is limited as
follows:
Setting the Camera Image and Audio — Camera Menu
47