Setting The Sensor Input/Camera Tampering Detection/Motion Detection - Event Detection Menu; Sensor Input Tab - Set The Sensor Input; Camera Tampering Detection Tab - Set The Camera Tampering Detection; Motion Detection Tab - Set The Motion Detection - Sony Ipela SNC-ER585 User Manual

Setting the Sensor input/
Camera tampering
detection/Motion
detection
— Event detection menu
Event detection
When you click
menu, the Event detection menu appears. The Event
detection menu consists of the Sensor input, Camera
tampering detection and Motion detection tabs.
Sensor input tab — Set the sensor
input
Sensor input mode
Set the direction of the detected input signal to the
sensor input terminal of the camera.
Normally open: Detects the alarm when the sensor
input is short-circuited.
Normally closed: Detects the alarm when the sensor
input is open-circuited.
OK/Cancel
See "Buttons common to every menu" on page 35.
90
Setting the Sensor input/Camera tampering detection/Motion detection — Event detection menu
in the Administrator
Camera tampering detection tab —
Set the camera tampering detection
Camera tampering detection
Select On to activate the function to detect the camera
tampering, such as direction shifting or spray. When you
select On, you can select the Sensitivity.
Sensitivity: Set the sensitivity of camera tampering
detection High, Middle or Low.
Detection status: Display the tampering detection state
of the time when Camera tampering detection tab is
opened. To clear the detection status, click Clear
button.
Note
Using the Privacy masking function reduces the
sensitivity of camera tampering detection. When camera
tampering detection does not work, set the sensitivity
higher. When a screen is masked more than 60%, the
camera tampering detection will refuse to respond even
if Sensitivity is set to High. Test this function before
using it.
OK/Cancel
See "Buttons common to every menu" on page 35.
Motion detection tab — Set the
motion detection
Motion detection detects moving objects in the camera
image and outputs an alarm.
Notes
• Before actual use, perform an operation test and
confirm that the motion detection function works
correctly.
• Using the Privacy masking function disables the
Motion detection function for the masked area.
• The Motion detection menu may not be displayed
depending on the function settings. To display the
Motion detection menu, configure as follows.
Installation tab in the System menu (page 40)
– Video out: Off (SNC-ZP550/ZR550)
Camera menu-Video codec tab (page 49)
– Letterbox: Off. (SNC-EP550/EP580/ER550/
ER580/ER585/ER585H/ZP550/ZR550)