Setting Items For Motion Detection - Sony Ipela SNC-ER585 User Manual

– Cropping: Off. (SNC-EP550/EP580/ER550/
ER580/ER585/ER585H/ZP550/ZR550)
– Codec of Image 2: Off.
• The motion detection function deactivates during PTZ
control, and also while the camera is moving to a
preset position. Once PTZ control is completed or the
camera arrives at the preset position, the motion
detection function reactivates.
When the Motion detection menu is
displayed for the first time
When you click Motion detection, "Security Warning"
is displayed.
When you click Yes, ActiveX control is installed and the
Motion detection menu is displayed.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the Proxy server
manually. For the setting of the Proxy server, consult
your network administrator.
• When you install ActiveX control, you should be
logged in to the computer as Administrator.
• When you are using Windows XP Service Pack 2 or
later, Windows Vista or Windows 7, the information
bar or "Security Warning" may appear as you click
Motion detection. For details, see "Installing ActiveX
Control" in "When using Windows XP Service Pack 2
or later" on page 10, "Installing ActiveX Control" in
"When using Windows Vista" on page 12, or
"Installing ActiveX Control" in "When using
Windows 7" on page 14.

Setting items for motion detection

Use the settings tab to set the conditions for the motion
detection function while observing camera images. This
menu is the same as the settings menu displayed when
you click Detection on Alarm transmission on the
e-Mail (SMTP) menu, or on the FTP client menu.
Click the desired item in the setting item list to set the
respective detection area.
Setting item list
Target Image
All PTZ position or Preset position
VMD settings (VMD: Motion detection)
Set detection area, detection response, detection
response speed and detection size for Motion detection.
Click the desired item in the setting item list to set the
respective detection area.
Detection area
Specify the effective scope of motion detection.
Note
The frames shown on the monitor screen are not
displayed on the image files sent or recorded with
motion detection.
Configuring the detection area
The following procedure is used to configure the motion
detection area:
Setting the Sensor input/Camera tampering detection/Motion detection — Event detection menu
Monitor screen
Setting area
91