Attaching Mounting Brackets To The Cabinet Vertical Rails; Figure 2-3. Screw Locations On The Rear Vertical Rails - NEC Express5800/320Ma Installation Manual

Attaching Mounting Brackets to the Cabinet Vertical Rails

Two mounting brackets, one on each rear vertical rail, support the shelf unit.
To attach the mounting brackets
1. On the rear vertical rails, use a pen to mark the holes indicated by dots in
Figure 2-3.

Figure 2-3. Screw Locations on the Rear Vertical Rails

6
5
4
3
2. Position a mounting bracket inside a rear vertical rail, lining up the holes in the
mounting bracket with the two holes you marked on the rear vertical rail. See
Figure 2-4.
3. Insert and tighten two 10-32 x 5/8-in. pan-head crest-cup screws (item 1 in
Figure 2-4) through the marked holes in the rear vertical rails and into the holes in
the mounting bracket.
4. Repeat steps 2 and 3 for the second mounting bracket.
Installing a Rack-Mounted System
Installing a Rack-Mountable System 2-5