Installing the Shelf Unit
!
1. At the front of the cabinet, insert four cage nuts into each vertical rail, in the
locations shown in
Figure 2-5. Cage Nut Locations on Front Vertical Rails
6
5
4
3
2
1
To insert cage nuts, refer to
a. Position the cage nut so that the flanges are on the top and bottom.
b. Insert the cage nut so that the top flange overlaps the vertical rail.
c. Use a cage-nut insertion tool or your fingers to pull the rest of the cage nut
through so that the bottom flange overlaps the vertical rail.
W A R N I N G
To avoid personal injury or damage to the shelf unit,
two persons are required to insert the shelf unit into
the cabinet and onto the mounting brackets.
Figure
2-5.
Figure 2-5
and perform the following steps:
Installing a Rack-Mountable System
Installing a Rack-Mounted System
2-7