Figure 2-12. System In A Cabinet - NEC Express5800/320Ma Installation Manual

Installing the System Components
c. Push the ejector levers up into the closed position and tighten the thumbscrews
so that the system is installed in the rack as shown in

Figure 2-12. System in a Cabinet

4. Attach the bezel.
a. Standing in front of the system, position the bezel so that the LED light
extensions that are inside the bezel are on the left.
b. Press the bezel towards the mounting rails until the bezel snaps into place.
2-14 Express5800/320Ma: System Installation Guide
Figure 2-12.
asys024a