Figure 2-4. Attaching The Mounting Brackets - NEC Express5800/320Ma Installation Manual

Installing a Rack-Mounted System

Figure 2-4. Attaching the Mounting Brackets

1 10-32 x 5/8-in. pan-head crest-cup screw
2 Right guide screw, 10-32 x 1/2-in. pan-head crest-cup
3 Left guide screw, 10-32 x 1/2-in. pan-head crest-cup
5. Measure the distance between the front and rear vertical rails in the cabinet.
•
If the rail depth is less than 27 in. (68.58 cm), move the guide screw (item 2 in
Figure
cabinet.
•
If the rail depth is greater than 27 in. (68.58 cm), move the guide screw (item 3)
in the left mounting bracket one hole closer to the front of the cabinet.
2-6 Express5800/320Ma: System Installation Guide
3
N O T E
Left and right in the following instructions are as seen from
the rear of the cabinet.
2-4) in the right mounting bracket one hole closer to the rear of the
2
1
asys014