Hitachi HF-W6500 45/40 User Manual page 42

5. If you press the [y] key in the confirmation message for changing the size of the boot
partition (step 4), a message is displayed to prompt you to enter a boot partition size.
Do you change the size of boot partition?
In case of "No",it is set to the default size (NNN MB).
(Yes[y]/No[n]):y
Input the size of boot partition by the megabyte[MB] and press
ENTER.
partition size(MIN-MAX[MB]):
The value (MIN) and the maximum value (MAX) of the acceptable range for
minimum
input are displayed. Enter a boot partition size in megabytes (1 MB = 1,048,576 bytes), and
press Enter.
After you a boot partition size, the following input confirmation message is displayed.
enter
partition size(MIN-MAX[MB]):20000
Set the boot partition size to 20000 MB.
Continue?
(Yes[y]/No[n]):
If you press the [y] key, restoring the drive starts and the progress is displayed (go to step
6).
If you press the [n] key, the following message is displayed and changing the size of the
boot partition is canceled. Press the power switch to turn off the power to the HF-W.
(Yes[y]/No[n]):n
System recovery process is canceled.
If you enter a value outside the acceptable range for input, the following message appears.
Enter a value again.
Input error.
Input the size of boot partition by the megabyte[MB] and press
ENTER.
partition size(MIN-MAX[MB]):
6. If you press the [y] key, restoring the drive starts and the progress is displayed.
HJ-654x***** system recovery START.
xx%
3. RESTORING THE FACTORY CONDITION USING A RECOVERY DVD
3-5