Setting Up Basic Settings Of Windows Server® 2008 R2; Overview Of The Setup Procedure Of Basic Settings - Hitachi HF-W6500 45/40 User Manual

2.2 Setting Up Basic Settings of Windows Server® 2008 R2
This section describes the setup procedures of basic settings for the pre-installed Windows
Server® 2008 R2 Standard.
Perform these procedures as required after you follow the instruction in "CHAPTER 1
SETUP PROCEDURE WHEN YOU TURN ON THE POWER FOR THE FIRST TIME" to
set up the OS.
2.2.1 Overview of the setup procedures of basic settings
Setting up the screen
Setting up automatic updating
Set up the network environment
Formatting hard disks
2. CONFIGURING BASIC SETTINGS AFTER OS SETUP
Refer to the "3.9 Setting Up the Screen" in the
HITACHI INDUSTRIAL COMPUTER HF-W6500
MODEL 45/40 USER'S MANUAL (Manual Number
WIN-62-0064).
The setup procedure is the same as for Windows® 7.
For details, see "2.1.3 Setting up automatic updating".
・The procedure takes about 5 minutes.
The setup procedure is the same as for Windows® 7.
For details, see "2.1.4 Setting up the network
environment".
・The procedure takes about 10 minutes.
The setup procedure is the same as for Windows® 7.
For details, see "2.1.5 Formatting a free area on a hard
disk".
・The time required for formatting depends on the size of
the partition you want to format.
2-11