Table of Contents
Advertisement
Outline
CCD trigger function does not need an external sensor
After a trigger window is setup, the IV-C35M does not need an external sensor if it is scanning
moving objects. To set up a trigger, you can select from color, binary image conversion, average
density, gray search, and edge detection techniques. The gray search mode is useful for a
workpiece for which you cannot easily establish the density range.
Scanning
direction
CCD trigger
Shutter speed freely set
The shutter speed can be set anywhere between 1/30 and 1/10000 second for each object type.
Practically, this means that the light level can be adjusted without changing the lighting equipment
for each object type. The random shutter function is used to close the shutter when a trigger event is
detected, so that precise still images of moving objects can be scanned.
CE approval applied for, widely accepted in international markets
The reliability of the IV-S30 means that it can be used in units destined for overseas markets.
Displays and transfers NG images while measurements are being made
While in measurement, NG images and NG history of the IV-C35M can be seen. Using the USB
communication, the controller transfers NG images to a personal computer in approximately 7 seconds.
This is convenient to investigate NG images for feedback for designing, and contributes to quality
improvement.
Automatically stores NG images on a flash memory card.
The controller is equipped with an interface for a compact flash memory card. When a compact flash
memory card is inserted in the controller housing, NG images can be stored on the card.
A flash memory card can store up to 264 NG images.
* 512x480 pixels: When a 192 MB capacity flash memory card is used.
Read the OK/NG results easily by looking at a colored display of the measurement area and
evaluation result information.
Since the IV-C35M can display the measurement area in any color and the results of the evaluation
can be display in any specified color, you can easily see for yourself if the result is OK or NG.
This function is available even when a monochrome camera is connected.
Customize to your own specification
An IV-S30LB1 image processing library and IV-S30SP parameter setting support software are both
available. Using these tools, the menu screen can be modified to suit your specialized needs to create
your own unique image processing system.
1-4
Advertisement
Table of Contents
